NSN 5306-00-948-0637
Coaxial Connector
5.809 inches fastener length, dished hexagon head style, 0.500 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number NAS1316-72DHW for national stock number 5306009480637.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-948-0637.
-
MPN or Model
NAS1316-72DHW
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.309 inches -
Fastener Length
5.809 inches -
Head Style
Dished hexagon -
Head Height
0.500 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
74600 pounds per square inch -
Thread Diameter
1.000 inches -
Grip Length
4.500 inches -
Thready Qty Per Inch (tpi)
12 -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.5545 inches first hole -
Material
Steel -
Thread Series Designator
Unf -
Specification Data
80205-nas1303 through 1320 professional/industrial association standard
More from these suppliers
- 5935-00-528-8440 MPN NAS1641R16T24SNElectrical Receptacle Connector
- 5940-01-425-7396 MPN NAS1063A11-337Terminal Board Marker Strip
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5305-00-051-8496 MPN MS24625-19Tapping Screw
- 5305-00-053-1090 MPN MS35199-63Machine Screw
- 5305-00-053-8965 MPN MS90726-167Hexagon Head Cap Screw
- 5305-00-054-2265 MPN MS24678-59CSocket Head Cap Screw
- 5305-00-059-3669 MPN MS51958-73Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-948-0637 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1316-72DHW | National Aerospace Standards |