NSN 5306-00-948-0650
Coaxial Connector
2.007 inches fastener length, double hexagon head style, 0.350 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number VS2521-10F22 for national stock number 5306009480650.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-948-0650.
-
MPN or Model
VS2521-10F22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.632 inches -
Fastener Length
2.007 inches -
Head Style
Double hexagon -
Head Height
0.350 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-123-2715 MPN AIC811-6-8Socket Head Cap Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-245-4631 MPN 965813-409CMachine Screw
- 5305-00-310-5807 MPN AIC811-04-4Socket Head Cap Screw
- 5305-00-372-8344 MPN HT4024L3-4Close Tolerance Screw
- 5305-00-548-5081 MPN 51B581-3-6Close Tolerance Screw
- 5305-00-807-0389 MPN NAS1102-08-5Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-948-0650 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2521-10F22 | Arconic Global Fasteners & Rings, |
AIC220-10A22 | Sps Technologies, Llc |
C081-10-22 | Sps Technologies, Llc |
C081-10-22 | Alcoa Global Fasteners, Inc. |
C081-10-22 | Lockheed Martin Corporation |
VS2521-10F22 | Alcoa Global Fasteners, Inc. |