NSN 5306-00-948-0694
Close Tolerance Hex Head Bolt
Between 3.244 inches and 3.285 inches fastener length, hexagon head style, between 0.120 inches and 0.140 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 51B464-4-47 for national stock number 5306009480694.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-948-0694.
-
MPN or Model
51B464-4-47
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.326 inches -
Fastener Length
Between 3.244 inches and 3.285 inches -
Head Style
Hexagon -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.066 inches all holes and 0.086 inches all holes -
Thread Diameter
0.250 inches -
Grip Length
Between 2.928 inches and 2.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
232.0 microinches -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-8503 military specification 4th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-220-5821 MPN 6-41444-5Switch Assy
- 1560-00-931-1456 MPN 6-42110-1Drag Chute Pin
- 1560-00-999-9816 MPN 3-70027-43Interior Trim Panel
- 1560-01-038-8393 MPN 14-23010-307Aircr Wing Assembly
- 1560-01-039-4206 MPN 18-10316-601Aircraft Access Door
- 1560-01-071-8300 MPN 3-23801-501Trailing Edge Panel
- 1560-01-081-4865 MPN 14-62451-2Mount Electrical Connect Support
- 1560-01-352-5281 MPN 8-31412-1Aircraft Structural Component Bracket
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-948-0694 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B464-4-47 | Northrop Grumman Technical Services, |
51B464-4-47 | Northrop Grumman Systems Corporation |
51B464-4-47 | Huck International, Inc. |
51B464-4-47 | Huck Intl Inc |