NSN 5306-00-953-1634
Coaxial Connector
1.419 inches fastener length, double hexagon extended washer head style, 0.618 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number MS21250-10008 for national stock number 5306009531634.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-953-1634.
-
MPN or Model
MS21250-10008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.899 inches -
Fastener Length
1.419 inches -
Head Style
Double hexagon extended washer -
Head Height
0.618 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
0.150 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Single Shear Strength
33150 pounds per square inch -
Thread Diameter
0.625 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-020-8049 MPN MS3103-22-5PElectrical Receptacle Connector
- 5935-00-042-3245 MPN MS3100R14S-7PWElectrical Receptacle Connector
- 5930-00-113-7584 MPN MS27408-1Toggle Switch
- 5905-00-136-3891 MPN MS35350-77Composition Fixed Resistor
- 5975-00-152-1107 MPN MS75022-13Electrical Conduit Bend
- 5935-00-201-2755 MPN MS35322-567AConnector Adapter
- 5935-00-221-9265 MPN MS3102A24-14SElectrical Receptacle Connector
- 5935-00-257-7457 MPN H16AREDElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-953-1634 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-10008 | Military Standards |