NSN 5306-00-956-5169
Close Tolerance Hex Head Bolt
Between 2.498 inches and 2.528 inches fastener length, double hexagon w/hole head style, 0.557 inches head height, width between flats: between 0.619 inches and 0.628 inches .
Manufacturer part number 154601 for national stock number 5306009565169.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-956-5169.
-
MPN or Model
154601
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.917 inches and 0.967 inches -
Fastener Length
Between 2.498 inches and 2.528 inches -
Head Style
Double hexagon w/hole -
Head Height
0.557 inches -
Width Between Flats
Between 0.619 inches and 0.628 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
0.133 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
End Application
Kc135 -
Thread Diameter
0.562 inches -
Grip Length
1.460 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-317-3582 MPN 2551544Aircraft Maintenance Fixture
- 4820-01-430-2600 MPN 8230521Calibrated Flow Valve
- 5305-00-854-0538 MPN 953510-84Socket Head Cap Screw
- 6105-00-797-6258 MPN 183671Electrical Rotating Equipment End Bell
- 5320-00-820-0513 MPN 70S14Tubular Rivet
- 5305-00-261-4290 MPN NAS1101-06-14Machine Screw
- 5305-00-526-1037 MPN BACB30LU3-7Close Tolerance Screw
- 5305-00-660-3030 MPN 53193-06-8Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-956-5169 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
154601 | Honeywell International Inc. |
154601 | Sps Technologies, Llc |
154601 | Honeywell International Inc. |