NSN 5306-00-957-2292
Wheel Bolt
3.000 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number MS51095-342 for national stock number 5306009572292.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-957-2292.
-
MPN or Model
MS51095-342
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.875 inches and 1.062 inches -
Fastener Length
3.000 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.938 inches and 2.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium or zinc -
Surface Treatment Specification
Ms25297-48 military standard single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-104-6148 MPN MS25089-3HPush Switch
- 5935-00-142-0368 MPN MS3108K24-10SElectrical Plug Connector
- 5935-00-222-7823 MPN MS3106B40-4PElectrical Plug Connector
- 5935-00-235-3289 MPN MS3103-28-21PXElectrical Receptacle Connector
- 5905-00-249-4200 MPN MS35043-110Composition Fixed Resistor
- 5935-00-270-3014 MPN MS27499E24B61SElectrical Receptacle Connector
- 5935-00-274-6866 MPN MS3108A20-20SElectrical Plug Connector
- 5905-00-279-1555 MPN MS90194-41Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-957-2292 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51095-342 | Military Standards |