NSN 5306-00-957-8353
Coaxial Connector
0.959 inches fastener length, double hexagon w/hole head style, 0.275 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number LWB22-3-10 for national stock number 5306009578353.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-957-8353.
-
MPN or Model
LWB22-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.334 inches -
Fastener Length
0.959 inches -
Head Style
Double hexagon w/hole -
Head Height
0.275 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.345 inches -
Extended Washer Thickness
0.064 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-246-7449 MPN AIC1024V3-3Close Tolerance Screw
- 5305-00-928-9648 MPN 51B335-5Machine Screw
- 5305-01-006-9329 MPN LS15263-3-6Machine Screw
- 5305-01-015-6646 MPN HT4025L3-3Close Tolerance Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
- 5305-01-238-5832 MPN BACB30VF4K10Close Tolerance Screw
- 5305-01-265-4912 MPN LE111-0035-2308Close Tolerance Screw
- 5305-01-436-2386 MPN BACB30LH3-9Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-957-8353 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LWB22-3-10 | Sps Technologies, Llc |
AIC220EL3-10 | Sps Technologies, Llc |
VS2201F3-10 | Arconic Global Fasteners & Rings, |
C083-3-10 | Lockheed Martin Corporation |
LWB22-3-10 | Sps Technologies, Llc |
VS2201F3-10 | Alcoa Global Fasteners, Inc. |
CO83-3-10 | Acufast Aircraft Products Inc. |