NSN 5306-00-958-8385
Close Tolerance Hex Head Bolt
2.799 inches fastener length, double hexagon extended washer head style, 0.806 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number STSBG003A12U024 for national stock number 5306009588385.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-958-8385.
-
MPN or Model
STSBG003A12U024
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.299 inches -
Fastener Length
2.799 inches -
Head Style
Double hexagon extended washer -
Head Height
0.806 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Extended Washer Diameter
Between 1.415 inches and 1.425 inches -
Extended Washer Thickness
0.152 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-7343 MPN ST3M454-3L5Close Tolerance Screw
- 5305-01-336-3215 MPN VCL0008-3D4PClose Tolerance Screw
- 5306-00-175-7997 MPN VAL12004-4-010Machine Bolt
- 5306-00-514-7739 MPN VEP220555-5-17Machine Bolt
- 5306-01-045-6583 MPN VAL23607-3-27Shoulder Bolt
- 5306-01-142-3544 MPN VAL23608-4D7Shoulder Bolt
- 5306-01-188-7584 MPN VFK600-7-17Shear Bolt
- 5306-01-200-7747 MPN BACB30LJ4-10Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-958-8385 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
STSBG003A12U024 | Lockheed Martin Corporation |
LS5995-12-24 | Lockheed Martin Corporation |
STSBG003A12U024 | Sps Technologies, Llc |
STSBG003A12U024 | Valley-todeco, Inc. |
STSBG003A12U024 | Sps Technologies, Llc |
STSBG003A12U024 | Sonic Industries Inc. |
STSBG003A12U024 | Sps Technologies, Llc |
11699A12U024 | Reid Products Inc. |