NSN 5306-00-964-1356
Coaxial Connector
Hex hole in point 0.156 in. Min dia,0.158 in. Max dia.
Manufacturer part number BM7025-5-9 for national stock number 5306009641356.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-964-1356.
-
MPN or Model
BM7025-5-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.612 inches -
Fastener Length
1.174 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
0.526 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-403-3477 MPN 32-33027-155Shoulder Screw
- 5305-00-727-8336 MPN NAS1101-04-6Machine Screw
- 5305-01-054-6234 MPN AIC9535-6-15Close Tolerance Screw
- 5305-01-054-6266 MPN AIC985-4-13Close Tolerance Screw
- 5305-01-191-3126 MPN AIC9535-7-34Close Tolerance Screw
- 5305-01-322-8717 MPN 720210-90Hexagon Head Cap Screw
- 5305-01-357-5868 MPN AIC4463-3-29Machine Screw
- 5305-01-417-2492 MPN TX1027V-3-6Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-964-1356 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM7025-5-9 | Huck International, Inc. |
AIC585-05-9 | Sps Technologies, Llc |
63357-05-9 | Sps Technologies, Llc |
VS2801-5-9 | Alcoa Global Fasteners, Inc. |
C585-05-9 | Lockheed Martin Corporation |
BM7025-5-9 | Huck Intl Inc |