NSN 5306-00-965-6769
Close Tolerance Hex Head Bolt
2.344 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN178C22A for national stock number 5306009656769.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-965-6769.
-
MPN or Model
AN178C22A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.782 inches -
Fastener Length
2.344 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-170-3060 MPN AN3106A16-2PElectrical Plug Connector
- 4820-00-433-3826 MPN AN6207-12Check Valve
- 5935-00-500-9148 MPN AN3108B24-14PElectrical Plug Connector
- 5935-00-549-6272 MPN AN3108E28-21PZElectrical Plug Connector
- 5935-00-643-5378 MPN AN3108B20-16SElectrical Plug Connector
- 5935-00-665-7186 MPN AN3102-18-3PElectrical Receptacle Connector
- 4820-00-965-6417 MPN AN6278-6Shuttle Valve
- 5305-00-054-6667 MPN MS51957-42Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-965-6769 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN178C22A | Aeronautical Standards Group |