NSN 5306-00-974-0864
Close Tolerance Hex Head Bolt
Between 0.976 inches and 1.006 inches fastener length, spline extended washer head style, between 0.494 inches and 0.514 inches head height, width between flats: between 0.556 inches and 0.565 inches .
Manufacturer part number 11700071 for national stock number 5306009740864.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-974-0864.
-
MPN or Model
11700071
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.716 inches and 0.766 inches -
Fastener Length
Between 0.976 inches and 1.006 inches -
Head Style
Spline extended washer -
Head Height
Between 0.494 inches and 0.514 inches -
Width Between Flats
Between 0.556 inches and 0.565 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
Between 0.113 inches and 0.133 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Silver -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-105-5626 MPN 7791160Electrical Receptacle Connector
- 5940-00-316-8994 MPN BA98015-2Terminal Board
- 5905-00-822-8520 MPN 7599055Film Fixed Resistor
- 5905-00-983-7315 MPN 8623438-2Noninductive Wire Wound Fixed Resistor
- 5940-01-068-2324 MPN 11748062Terminal Board
- 5905-01-085-6393 MPN 11732680-138Film Fixed Resistor
- 5935-01-132-0298 MPN 11830008Electrical Receptacle Connector
- 5985-01-198-3235 MPN 12604452-1Radio Frequency Transmission Line Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-974-0864 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
11700071 | Us Army Ardec Rdecom |
1170071 | Us Army Ardec Rdecom |
11700071 | Sps Technologies, Llc |
11700071 | Alcoa Global Fasteners, Inc. |
11700071 | Springfield Armory |
LT1190 | Precision Speed Manufacturing, Llc |
5306009740864 | E.c.a Etablissement Central |
Stock Check
- NS: 88
- NE: 52
- OH: 1
- AR: 2