NSN 5306-00-974-6595
Close Tolerance Hex Head Bolt
1.976 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number VS2521F5-26 for national stock number 5306009746595.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-974-6595.
-
MPN or Model
VS2521F5-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.351 inches -
Fastener Length
1.976 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel or steel comp h11 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Test Data Document
26512-gb511b drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Thread Series Designator
Unjf -
Specification Data
26512-gb511b5 manufacturers standard
More from these suppliers
- 5305-01-027-2005 MPN ST3M652C3-7AClose Tolerance Screw
- 5305-01-089-3144 MPN ST3M714-3-6Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5305-01-600-3735 MPN 3M1277E6D17AMachine Screw
- 5306-01-017-3650 MPN VFK100G-06035Shear Bolt
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
- 5306-01-133-1571 MPN VCG0001-8D66Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-974-6595 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2521F5-26 | Arconic Global Fasteners & Rings, |
VAL22034-5-26 | Valley-todeco, Inc. |
AIC51685-26 | Sps Technologies, Llc |
PBF10785-26 | Sps Technologies, Llc |
MB182JK-5-26 | Hi-shear Corporation |
MB182JK-5-26 | Lisi Aerospace Canada Corp |
EWSB22-5A26 | Sps Technologies, Llc |
EWSB22-5A26 | Sps Technologies, Llc |
VS2521F5-26 | Alcoa Global Fasteners, Inc. |
GB511B5-26 | Northrop Grumman Systems Corporation |