NSN 5306-00-982-3581
Coaxial Connector
3.875 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS1105-56DW for national stock number 5306009823581.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-982-3581.
-
MPN or Model
NAS1105-56DW
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
3.875 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
3.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.756 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf -
Specification Data
80205-nas1105 professional/industrial association standard
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-106SNFElectrical Receptacle Connector
- 1680-00-939-9127 MPN NAS25-4RTrunnion Tank Strap
- 5940-01-416-6336 MPN NAS1829BT4E14Stud Terminal
- 1560-01-450-3720 MPN NAS1833-3-350MAircraft Structural Component Support
- 1560-01-594-5017 MPN NAS1919C04-05PAircraft Stiffener
- 5305-00-007-3019 MPN NAS1102E02-3PMachine Screw
- 5305-00-008-5813 MPN NAS1742C06R10Socket Head Cap Screw
- 5305-00-051-4134 MPN MS24694C95Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-982-3581 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1105-56DW | National Aerospace Standards |