1-321-802-5889
Email Us

NSN 5306-00-987-9460

Close Tolerance Hex Head Bolt

About this product

Between 2.297 inches and 2.327 inches fastener length, hexagon head style, between 0.296 inches and 0.328 inches head height, width between flats: between 0.928 inches and 0.940 inches .

Manufacturer part number BACB30BH10C29 for national stock number 5306009879460.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-00-987-9460.

  • MPN or Model

    BACB30BH10C29

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.3 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.500 inches
  • Fastener Length
    Between 2.297 inches and 2.327 inches
  • Head Style
    Hexagon
  • Head Height
    Between 0.296 inches and 0.328 inches
  • Width Between Flats
    Between 0.928 inches and 0.940 inches
  • Grip Diameter
    Between 0.6234 inches and 0.6240 inches
  • Shank Unthreaded Hole Diameter
    0.141 inches first hole and 0.146 inches first hole
  • Thread Diameter
    0.625 inches
  • Grip Length
    Between 1.802 inches and 1.822 inches
  • Thready Qty Per Inch (tpi)
    18
  • Min. Tensile Strength (psi)
    130000 pounds per square inch
  • Hardness Rating
    24.0 rockwell c and 35.0 rockwell c
  • Minimum Yield Strength
    85000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.128 inches first hole and 2.140 inches first hole
  • Surface Finish
    32.0 microinches threads
  • Material
    Iron alloy 660
  • Material Specification
    Ams 5732 assn standard single material response
  • Thread Series Designator
    Unf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-00-987-9460 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306009879460

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
BACB30BH10C29 The Boeing Company
Stock Check
Availability for this item was last checked on 08/10/24. The quantities and conditions available at the time were:
  • NS: 26
  • NE: 97
  • SV: 1