NSN 5306-00-988-2146
Wheel Bolt
1.000 inches fastener length, double hexagon w/hole head style, 0.375 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9210-12 for national stock number 5306009882146.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-988-2146.
-
MPN or Model
MS9210-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.855 inches and 0.875 inches -
Fastener Length
1.000 inches -
Head Style
Double hexagon w/hole -
Head Height
0.375 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
0.500 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.125 inches and 0.145 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
42.0 rockwell c and 46.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 601 -
Material Specification
Ams 6304 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-051-4146 MPN MS3106R10SL4SElectrical Plug Connector
- 5935-00-053-9430 MPN MS3103-32-7SElectrical Receptacle Connector
- 5935-00-080-5847 MPN MS3108R22-19SElectrical Plug Connector
- 5935-00-081-4340 MPN MS24266R22B55SElectrical Plug Connector
- 5935-00-132-2309 MPN MIL-C-39024/11Tip Jack
- 5905-00-174-2710 MPN MS35048-39Wire Wound Fixed Resistor
- 5935-00-185-9534 MPN MS27291-14Electrical Connector Cable Clamp
- 5935-00-204-8925 MPN MS3100A28-21SElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-988-2146 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9210-12 | Military Standards |
Stock Check
- NE: 3009
- NS: 72
- SV: 1
- AR: 1