NSN 5306-00-989-4104
Wheel Bolt
8.812 inches fastener length, hexagon head style, 0.562 inches head height, width between flats: between 1.008 inches and 1.125 inches .
Manufacturer part number 12-32515-1 for national stock number 5306009894104.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-989-4104.
-
MPN or Model
12-32515-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
8.812 inches -
Head Style
Hexagon -
Head Height
0.562 inches -
Width Between Flats
Between 1.008 inches and 1.125 inches -
Hole Diameter
0.065 inches -
Thread Diameter
0.750 inches -
Grip Length
7.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hole Configuration Style
Double hexagon flats -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-057-0436 MPN 422486-4Electrical Plug Connector
- 5975-01-267-3136 MPN 518918-1Junction Box
- 4920-01-268-0920 MPN 1427AS100-1Run-in Dynamometer
- 5930-00-862-5582 MPN N2562-43753-1Electrical Switch Yoke
- 6110-01-489-1484 MPN 212775-3Electrical System Protection Panel
- 5305-00-191-3747 MPN A414463-15Socket Head Cap Screw
- 5305-00-292-8001 MPN 1029B8-12Tapping Screw
- 5305-00-481-4227 MPN 509441-612Socket Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-989-4104 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12-32515-1 | Naval Air Warfare Center Aircraft |