NSN 5306-01-004-0397
Wheel Bolt
Locking feature material plastic polymide.
Manufacturer part number MS21095-4004 for national stock number 5306010040397.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-004-0397.
-
MPN or Model
MS21095-4004
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.506 inches -
Fastener Length
Between 0.704 inches and 0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Locking Feature
Patch threads -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Stainless steel -
Material Specification
Mil-s-18732 military specification single material response fastener -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-434-4951 MPN TS1352-02LL8PSocket Head Cap Screw
- 5305-01-015-3346 MPN LK1081C02A4Setscrew
- 5935-00-003-7720 MPN MS27474E22B2SElectrical Receptacle Connector
- 5935-00-115-2305 MPN MS17349N28BElectrical Connector Cover
- 5935-00-133-0522 MPN MS18189-1Electrical Connector Insert
- 5935-00-137-4669 MPN MS25043-14DElectrical Connector Cover
- 5905-00-157-0881 MPN MS35049-27Inductive Wire Wound Fixed Resistor
- 5935-00-158-4815 MPN MS3106F22-34SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-004-0397 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-4004 | Military Standards |
LK21095-4004 | Torkon Fastener Corp |
MS21095-4004 | Military Standards |
LK21095-4004 | Torkon Fastener Corp |
MS21095-4004 | Military Standards |
LK21095-4004 | Torkon Fastener Corp |
MS21095-4004 | Military Standards |
LK21095-4004 | Torkon Fastener Corp |
LK21095-4004 | Torkon Fastener Corp |
MS21095-4004 | Military Standards |
MS21095-4004 | Military Standards |
LK21095-4004 | Torkon Fastener Corp |