NSN 5306-01-006-2402
Coaxial Connector
Between 0.838 inches and 0.868 inches fastener length, flat chamfer head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2641 inches and 0.2651 inches .
Manufacturer part number LS7620-4-7 for national stock number 5306010062402.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-006-2402.
-
MPN or Model
LS7620-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.838 inches and 0.868 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2641 inches and 0.2651 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.427 inches and 0.447 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Mil-s-7839 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-009-2696 MPN 4F77155-103BNose Fairing Rib
- 1560-00-011-1463 MPN 3F41536-102Petal Door Hinge
- 1560-00-018-5261 MPN 780933Defogging Du Collar
- 1560-00-022-9423 MPN 341401RAircraft Structural Plate
- 5940-00-027-5756 MPN LS7000Terminal Board
- 1560-00-047-3805 MPN 174966LAircraft Structural Component Fitting
- 1560-00-076-4853 MPN 3A97019-103Bleed Air Duct Assembly
- 1560-00-097-6811 MPN 4C51770-101DElevat Control Quadrant Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-006-2402 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS7620-4-7 | Lockheed Martin Corporation |