NSN 5306-01-006-9466
Close Tolerance Hex Head Bolt
Between 1.110 inches and 1.130 inches fastener length, between 0.440 inches and 0.460 inches head diameter, between 0.110 inches and 0.130 inches head height, width between flats: 0.230 inches .
Manufacturer part number 9146M65P03 for national stock number 5306010069466.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-006-9466.
-
MPN or Model
9146M65P03
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.551 inches and 0.660 inches -
Fastener Length
Between 1.110 inches and 1.130 inches -
Head Diameter
Between 0.440 inches and 0.460 inches -
Head Height
Between 0.110 inches and 0.130 inches -
Width Between Flats
0.230 inches -
Grip Diameter
Between 0.2644 inches and 0.2646 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.470 inches and 0.551 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Inconel fscm 74900 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-224-2471 MPN 1C5795P04Draw Shaft
- 4920-00-255-1055 MPN 1C6325G01Aircraft Maintenance Fixture
- 5975-00-327-8103 MPN 9451812-10Electrical Cable Protector
- 1560-00-469-9321 MPN 9679M30P07Thrust Actuator Mount
- 5950-00-735-9440 MPN 8209234P1Audio Frequency Transformer
- 5905-00-958-0911 MPN R984P4570AInductive Wire Wound Fixed Resistor
- 4920-01-060-4103 MPN 21C5016P10Yoke
- 4920-01-155-8099 MPN 3C3296G01Aircraft Engine Accessories Maintenance Stand
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-006-9466 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9146M65P03 | General Electric Company |
9146M65P03 | Acufast Aircraft Products Inc. |
9146M65P03 | M.s. Aerospace Inc. |