NSN 5306-01-007-0853
Close Tolerance Hex Head Bolt
Between 1.704 inches and 1.734 inches fastener length, hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS675V20D for national stock number 5306010070853.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-007-0853.
-
MPN or Model
NAS675V20D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.704 inches and 1.734 inches -
Head Style
Hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.513 inches first hole and 1.563 inches first hole -
Surface Finish
63.0 microinches bearing surface of head -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas675 professional/industrial association standard
More from these suppliers
- 5940-01-451-2677 MPN NAS1063E5-550CTerminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-001-4754 MPN NAS1018-34AHexagon Head Cap Screw
- 5305-00-031-0660 MPN NAS1132-9Close Tolerance Screw
- 5305-00-043-2693 MPN MS24693-S292Machine Screw
- 5305-00-127-5684 MPN NAS1135V11Close Tolerance Screw
- 5305-00-132-6912 MPN MS27039DD4-19Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-007-0853 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS675V20D | National Aerospace Standards |