NSN 5306-01-008-1092
Coaxial Connector
Between 2.140 inches and 2.170 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number BM3326-4-27 for national stock number 5306010081092.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-008-1092.
-
MPN or Model
BM3326-4-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.493 inches -
Fastener Length
Between 2.140 inches and 2.170 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.677 inches and 1.697 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5306-00-218-1489 MPN MS21250-09064Shear Bolt
- 5306-00-286-0294 MPN VAL23029-4D15Close Tolerance Bolt
- 5306-01-052-7201 MPN VAL23029-5-12Close Tolerance Bolt
- 5306-01-054-3416 MPN C7521-4-10Shear Bolt
- 5306-01-054-3420 MPN VCG0009L6-14Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-008-1092 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM3326-4-27 | Huck International, Inc. |
S371-4-27 | Huck International, Inc. |
VS3060-4-27 | Arconic Global Fasteners & Rings, |
ST3M571-4-27 | Boeing Company, The |
VAL23033-4-27 | Valley-todeco, Inc. |
ATC757-4-27 | Sps Technologies, Llc |
ST3M571-4-27 | Sps Technologies, Llc |
S11-1059-4-27 | Sonic Industries Inc. |
74328-4-27 | Sps Technologies, Llc |
MBB4-4-27 | Hi-shear Corporation |
ST3M571-4-27 | J M Precision Inc |
ST3M571-4-27 | Alcoa Global Fasteners, Inc. |
MBB4-4-27 | Lisi Aerospace Canada Corp |
BM3326-4-27 | Huck Intl Inc |
S371-4-27 | Huck Intl Inc |
VS3060-4-27 | Alcoa Global Fasteners, Inc. |