NSN 5306-01-009-1240
Coaxial Connector
Hexagon head style, between 0.250 inches and 0.266 inches head height, between 0.740 inches and 0.752 inches width between flats, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 160D960123-15 for national stock number 5306010091240.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-009-1240.
-
MPN or Model
160D960123-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.396 inches and 0.401 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.266 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.110 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 1.631 inches and 1.636 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.922 inches first hole -
Material
Steel comp 4130 -
Material Specification
Mil-s-5000, cond d military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-050-5303 MPN GC810FC4Electrical Plug Connector
- 5930-00-063-7214 MPN GS836BV5-2Toggle Switch
- 5935-00-122-0023 MPN GC15A4P14S2SElectrical Plug Connector
- 1560-00-151-3977 MPN 128BP10120-3Radome
- 1560-00-225-0532 MPN 121WM10085-13Fitting Assembly
- 1560-00-310-3574 MPN 123BH50003-5Aircraft Floor
- 5935-00-391-5756 MPN GC811EP1Electrical Receptacle Connector
- 5935-00-400-4751 MPN GC801DP37-19SY1Electrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-009-1240 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D960123-15 | Northrop Grumman Systems Corporation |
160D960123-15 | Northrop Grumman Systems Corporation |