NSN 5306-01-009-5121
Externally Relieved Body Bolt
Between 0.730 inches and 0.780 inches fastener length, hexagon head style, between 0.180 inches and 0.200 inches head height, width between flats: between 0.600 inches and 0.620 inches .
Manufacturer part number 705B411P3 for national stock number 5306010095121.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-01-009-5121.
-
MPN or Model
705B411P3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.310 inches -
Fastener Length
Between 0.730 inches and 0.780 inches -
Head Style
Hexagon -
Head Height
Between 0.180 inches and 0.200 inches -
Width Between Flats
Between 0.600 inches and 0.620 inches -
Hole Diameter
0.070 inches -
First Diameter From Head
Between 0.496 inches and 0.498 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.050 inches and 0.070 inches -
Thread Diameter
0.438 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hole Configuration Style
Hexagon longitudinal hole -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel -
Material Specification
C50t35, general electric co mfr ref single material response -
Precious Material
Silver -
Surface Treatment
Silver -
Surface Treatment Specification
Ams 2410 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-009-5975 MPN 9020M72G02Rev Thrust Retainer
- 4920-00-135-9564 MPN 21C2793-176Engine Control Rod
- 4920-00-482-9312 MPN 21C1201G002Sha Electric Heater
- 4920-00-628-4078 MPN 1C2863Temperature Tester
- 5905-00-907-3375 MPN R999P1290AInductive Wire Wound Fixed Resistor
- 5905-00-957-8902 MPN R984P0300BInductive Wire Wound Fixed Resistor
- 4920-01-003-4619 MPN 518D540P78Turn Limiter
- 4920-01-013-9908 MPN 1C6769G01Aircraft Maintenance Fixture
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-01-009-5121 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
705B411P3 | General Electric Company |