NSN 5306-01-011-1706
Wheel Bolt
0.062 in. Dia hole through side of head.
Manufacturer part number FF-S-85 for national stock number 5306010111706.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-011-1706.
-
MPN or Model
FF-S-85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
Between 0.719 inches and 0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.437 inches -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10 style
More from these suppliers
- 5935-00-808-3250 MPN NAS715-23AElectrical Receptacle Connector
- 1560-01-423-4601 MPN NAS6704D25Aircraft Structural Component Support
- 5935-01-597-0337 MPN E0762F15-04LSpec Backshell
- 5935-01-650-0947 MPN MS24266R14B12PElectrical Plug Connector
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
- 5305-00-018-7513 MPN NAS1219-5-16PMachine Screw
- 5305-00-050-1092 MPN NAS560CK2P1Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-011-1706 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-85 | Federal Specifications |
MS51095-306L | National Aerospace Standards |
MS51095-306L | Military Standards |