1-321-802-5889
Email Us

NSN 5306-01-011-4363

Close Tolerance Hex Head Bolt

About this product

Between 0.935 inches and 0.955 inches fastener length, dished hexagon head style, between 0.095 inches and 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .

Manufacturer part number 106467-3-09 for national stock number 5306010114363.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-011-4363.

  • MPN or Model

    106467-3-09

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.264 inches and 0.310 inches
  • Fastener Length
    Between 0.935 inches and 0.955 inches
  • Head Style
    Dished hexagon
  • Head Height
    Between 0.095 inches and 0.110 inches
  • Width Between Flats
    Between 0.367 inches and 0.376 inches
  • Locking Feature
    Detent ball grip
  • Grip Diameter
    Between 0.1885 inches and 0.1894 inches
  • Shank Unthreaded Hole Diameter
    0.070 inches first hole and 0.080 inches first hole
  • Thread Diameter
    0.190 inches
  • Grip Length
    Between 0.562 inches and 0.578 inches
  • Thready Qty Per Inch (tpi)
    32
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    0.881 inches first hole and 0.815 inches first hole
  • Surface Finish
    63.0 microinches grip
  • Material
    Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150
  • Surface Treatment
    Cadmium and chromate
  • Surface Treatment Specification
    Qq-p-416 type 2 cl 2 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-011-4363 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306010114363

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
106467-3-09 Sps Technologies, Llc
AS194-3-09 Avibank Mfg., Inc.
MS27576-3-09 National Aerospace Standards
MS27576-3-09 Military Standards
CA4510-3-09 Arconic Global Fasteners & Rings,
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.