NSN 5306-01-013-7038
Coaxial Connector
Between 1.397 inches and 1.427 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number GB511W4-16 for national stock number 5306010137038.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-013-7038.
-
MPN or Model
GB511W4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.387 inches and 0.437 inches -
Fastener Length
Between 1.397 inches and 1.427 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-006-0566 MPN A51B92181-11Tension Latch Cover
- 1560-00-006-8050 MPN A51B20173-15Fairing Cover Assembly
- 1560-00-066-6225 MPN 123CS10141-6Aircraft Access Door
- 1560-00-066-6320 MPN 123PM10226-1Cone Fitting
- 5930-00-070-0006 MPN 128SCEC108-5Thermostatic Switch
- 1560-00-089-7747 MPN 128AVP10257-1Panel Assy
- 5930-00-114-4188 MPN A32S9428-1Switch Assembly
- 1560-00-133-4139 MPN 134BM10163-2Door R Latch Sector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-013-7038 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511W4-16 | Sps Technologies, Llc |
VS3070F4-16 | Alcoa Global Fasteners, Inc. |
GB511W4-16 | Sps Technologies, Llc |
GB511W4-16 | Northrop Grumman Systems Corporation |
GB511W4-16 | Northrop Grumman Systems Corporation |
VS3070F4-16 | Alcoa Global Fasteners, Inc. |