NSN 5306-01-014-1188
Coaxial Connector
Between 1.652 inches and 1.699 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB22-4-22 for national stock number 5306010141188.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-014-1188.
-
MPN or Model
EWSB22-4-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 1.652 inches and 1.699 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel or steel comp h11 -
Material Specification
Sps-m-107 fscm 56878 mfr ref 1st material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-345-2269 MPN 66904H4-25Shoulder Screw
- 5305-00-432-3881 MPN NAS1123-12Close Tolerance Screw
- 5305-00-760-3823 MPN NAS1133-8Close Tolerance Screw
- 5305-00-914-2914 MPN SFT22-5A11Machine Screw
- 5305-01-044-0745 MPN SFH22D6A20Close Tolerance Screw
- 5305-01-085-3877 MPN NAS1189E02P6KSocket Head Cap Screw
- 5305-01-106-3859 MPN HT4068-4-14Close Tolerance Screw
- 5305-01-141-7194 MPN 3M902C5-22DShoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-014-1188 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-4-22 | Sps Technologies, Llc |
EWSB22-4-22 | Sps Technologies, Llc |