NSN 5306-01-014-7746
Coaxial Connector
Between 1.137 inches and 1.184 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 160D414039-11 for national stock number 5306010147746.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-014-7746.
-
MPN or Model
160D414039-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.377 inches and 0.444 inches -
Fastener Length
Between 1.137 inches and 1.184 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.137 inches and 1.184 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
185000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 46.0 rockwell c -
Material
Steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-9064 MPN A51B92193-11Cowling Intake Duct
- 1560-00-006-2219 MPN A51P30524-3Fuel Motive Flo Adapter Assembly
- 5985-00-009-7635 MPN A51A9005-7Antenna
- 1560-00-047-1887 MPN 89LM1884-1Fitting
- 1560-00-066-2980 MPN 123W10255-17Aircraft Access Cover
- 1560-00-075-8230 MPN 128WP10032-3Hi Fairing Assembly
- 5935-00-165-8511 MPN GJ802AU1Electrical Receptacle Connector
- 1560-00-172-2345 MPN 123ABH10042-503Airborne Equipment Panel
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-014-7746 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D414039-11 | Northrop Grumman Systems Corporation |
160D414039-11 | Northrop Grumman Systems Corporation |
160D414039-11 | Northrop Grumman Systems Corporation |