NSN 5306-01-015-5685
Coaxial Connector
Between 4.875 inches and 4.922 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number C081-8-70 for national stock number 5306010155685.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-015-5685.
-
MPN or Model
C081-8-70
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.557 inches -
Fastener Length
Between 4.875 inches and 4.922 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 4.365 inches and 4.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5147 MPN HT4024L4-5Close Tolerance Screw
- 5305-00-505-2994 MPN LS15264V3-12Machine Screw
- 5305-00-820-2383 MPN NAS1101-3H12Machine Screw
- 5305-01-054-6242 MPN AIC9535-7-12Close Tolerance Screw
- 5305-01-158-5373 MPN 3M893-5-6Machine Screw
- 5305-01-183-6985 MPN 3M927-4L5Close Tolerance Screw
- 5305-01-234-2563 MPN LD111-0044-2310Close Tolerance Screw
- 5305-01-246-3864 MPN AIC811-04-21Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-015-5685 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C081-8-70 | Sps Technologies, Llc |
C081-8-70 | Alcoa Global Fasteners, Inc. |
C081-8-70 | Lockheed Martin Corporation |
EWSB22-8A70 | Sps Technologies, Llc |