NSN 5306-01-016-1657
Wheel Bolt
Between 1.115 inches and 1.135 inches fastener length, double hexagon w/hole head style, between 0.320 inches and 0.340 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number R584P15U for national stock number 5306010161657.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-016-1657.
-
MPN or Model
R584P15U
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.740 inches and 0.820 inches -
Fastener Length
Between 1.115 inches and 1.135 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.320 inches and 0.340 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.315 inches and 0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
63.0 microinches grip -
Material
Nickel alloy -
Material Specification
C50t82a, fscm 07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-149-9482 MPN 1C5161G01Aircraft Maintenance Fixture
- 4920-00-193-2252 MPN 1C5652P10Stator Vanes Holder
- 5930-00-225-9308 MPN 21C1593-38Switch Assembly
- 4920-00-330-4097 MPN 1C2254Aircraft En Support
- 5905-00-551-4241 MPN J118P9500AWire Wound Fixed Resistor
- 5935-00-552-7896 MPN 21C1535-068Electrical Plug Connector
- 4920-01-088-4590 MPN 21C8176G02Rotor Holding Fixture
- 4920-01-171-0783 MPN 3C3353G01Aircraft Engine Maintenance Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-016-1657 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R584P15U | General Electric Company |