NSN 5306-01-016-2907
Wheel Bolt
2.750 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: 0.312 inches .
Manufacturer part number MS9557-34 for national stock number 5306010162907.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-016-2907.
-
MPN or Model
MS9557-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
2.750 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
0.060 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.940 inches and 2.000 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-186-2968 MPN MS35045-11Composition Fixed Resistor
- 5935-00-189-2532 MPN MS3474L14-12PElectrical Receptacle Connector
- 5905-00-195-2474 MPN M22-03-00081FKNonprecision Wire Wound Variable Resistor
- 5935-00-202-0960 MPN MS3106E20-19PElectrical Plug Connector
- 4820-00-202-5741 MPN MS28885-20Check Valve
- 5935-00-224-5979 MPN MS3106F16S1SCElectrical Plug Connector
- 5935-00-236-7427 MPN MS3106B24-28PElectrical Plug Connector
- 5935-00-256-1141 MPN MS27508E12B35PAElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-016-2907 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9557-34 | Military Standards |
Stock Check
- NS: 133
- NE: 883