NSN 5306-01-016-7867
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.078 inches shoulder thickness, between 0.515 inches and 0.562 inches shank length, eye stock thickness: between 0.120 inches and 0.130 inches .
Manufacturer part number AN43B-C4 for national stock number 5306010167867.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-016-7867.
-
MPN or Model
AN43B-C4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.453 inches and 0.500 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.078 inches -
Shank Length
Between 0.515 inches and 0.562 inches -
Eye Stock Thickness
Between 0.120 inches and 0.130 inches -
Shoulder Diameter
0.500 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Overall Length
Between 1.265 inches and 1.312 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.015 inches -
Eye Outside Width
0.500 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6041 MPN NAS1063A5-436Terminal Board Marker Strip
- 5940-01-425-7415 MPN NAS1063A14-423Terminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-005-8210 MPN NAS1351C03-4Socket Head Cap Screw
- 5305-00-008-9119 MPN NAS1190C04T22LSocket Head Cap Screw
- 5305-00-053-1135 MPN MS35273-94Machine Screw
- 5305-00-057-0484 MPN MS24694C128Machine Screw
- 5305-00-058-9391 MPN MS51977-76Setscrew
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-016-7867 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN43B-C4 | National Aerospace Standards |
AN43B-C4 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.