NSN 5306-01-017-6307
Close Tolerance Hex Head Bolt
Between 3.280 inches and 3.300 inches fastener length, double hexagon extended washer head style, 0.495 inches head height, width between flats: 0.562 inches .
Manufacturer part number J428P123A for national stock number 5306010176307.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-017-6307.
-
MPN or Model
J428P123A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.946 inches -
Fastener Length
Between 3.280 inches and 3.300 inches -
Head Style
Double hexagon extended washer -
Head Height
0.495 inches -
Width Between Flats
0.562 inches -
Extended Washer Diameter
0.750 inches -
Extended Washer Thickness
0.130 inches -
Grip Diameter
Between 0.4990 inches and 0.5000 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.339 inches and 2.349 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches threads -
Material
Nickel -
Material Specification
Inconel 718, fscm 74900 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-792-6001 MPN R999P0930AInductive Wire Wound Fixed Resistor
- 5905-00-959-1498 MPN R983P3571CFilm Fixed Resistor
- 4920-01-091-2901 MPN 21C8149G02Holding Assembly Fixture
- 5905-01-114-6477 MPN J165P2611AInductive Wire Wound Fixed Resistor
- 5905-01-146-7262 MPN J165P4641AWire Wound Fixed Resistor
- 4920-01-172-0369 MPN 3C3269G02Aircraft Engine Accessories Maintenance Stand
- 5905-01-188-6470 MPN J165P2610AWire Wound Fixed Resistor
- 4920-01-286-1045 MPN 21C8761G01Mask Centre Forward
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-017-6307 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J428P123A | General Electric Company |