NSN 5306-01-019-4634
Coaxial Connector
Between 8.690 inches and 8.700 inches fastener length, round w/wrench flats head style, 1.000 inches head diameter, head height: 0.400 inches .
Manufacturer part number 66-2507-1 for national stock number 5306010194634.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-019-4634.
-
MPN or Model
66-2507-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.550 inches and 0.610 inches -
Fastener Length
Between 8.690 inches and 8.700 inches -
Head Style
Round w/wrench flats -
Head Diameter
1.000 inches -
Head Height
0.400 inches -
Width Between Flats
Between 0.800 inches and 0.805 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
8.140 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6427 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-073-2468 MPN 107S2453-1Bell Crank
- 1560-00-073-4005 MPN 107C2350-6Rod Assembly
- 1680-00-219-3695 MPN 9-43307P Windlass Assembly
- 4920-00-253-4065 MPN 20HME65B00784-1Exhaust Pipe Support
- 1560-00-333-6697 MPN 5-89848-2Aircraft Structural Component Support
- 1680-00-612-3631 MPN 65-5850-11Crew Re Bucket Assy
- 5940-00-666-4435 MPN BACS13S194BNPGrounding Metallic Shielded Cable Ferrule
- 1560-00-761-7977 MPN 107E4562-7Duct Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-019-4634 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66-2507-1 | The Boeing Company |