NSN 5306-01-022-3051
Wheel Bolt
Tw grooves on shank.
Manufacturer part number 756428-1 for national stock number 5306010223051.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-022-3051.
-
MPN or Model
756428-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 1.500 inches and 1.530 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.366 inches first hole and 1.416 inches first hole -
Material
Steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-1971 MPN 4J31138-132BAircraft Structural Panel
- 1560-00-014-4250 MPN 765338-1Throttle Cont Block
- 1560-00-015-9019 MPN 3E42189-102Fuselage Frame Cover
- 5940-00-023-8646 MPN LS3850-2-3Terminal Board Shield
- 1560-00-047-3550 MPN 146793LFitting
- 1560-00-101-9333 MPN 4E52019-101AAircraft Structural Panel
- 1560-00-107-0346 MPN 4F11576-101BFillet Fairing Panel
- 4920-00-112-9697 MPN 4S94221-101AAircraft Maintenance Kit
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-022-3051 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
756428-1 | Lockheed Martin Corporation |
756428-1 | Seanair Machine Co. Inc. |