NSN 5306-01-023-9720
Close Tolerance Hex Head Bolt
Between 1.953 inches and 2.000 inches fastener length, between 0.140 inches and 0.172 inches head height, between 0.428 inches and 0.440 inches width between flats, grip diameter: between 0.2487 inches and 0.2492 inches .
Manufacturer part number 3M33-4H24 for national stock number 5306010239720.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-023-9720.
-
MPN or Model
3M33-4H24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.953 inches and 2.000 inches -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response
More from these suppliers
- 1560-00-020-6073 MPN 32-32067-22Aircraft Former
- 1560-00-088-9721 MPN 32-17002-71Aircraft Access Door
- 1560-00-103-1131 MPN 53-80512-27Forward Cock Dust Cover Assembly
- 1560-00-118-0821 MPN 32-18552-312Trail Duct Assembly
- 5935-00-136-6293 MPN 53-79072-9Plug Dummy Connector
- 1560-00-140-9506 MPN 32-33138-603Aircraft Frame
- 1560-00-173-3952 MPN 53G970702-28Slat Control Drive Link
- 4920-00-201-7913 MPN 53E350012-307Navigati Test Bench
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-023-9720 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-4H24 | Boeing Company, The |
3M33-4H24 | Boeing Company, The |