NSN 5306-01-025-4825
Coaxial Connector
Between 2.491 inches and 2.538 inches fastener length, double hexagon head style, between 0.340 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number BM17020-10-30A for national stock number 5306010254825.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-025-4825.
-
MPN or Model
BM17020-10-30A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.606 inches and 0.673 inches -
Fastener Length
Between 2.491 inches and 2.538 inches -
Head Style
Double hexagon -
Head Height
Between 0.340 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
08524-b-17020 manufacturers standard
More from these suppliers
- 5305-01-522-0083 MPN BACB30NT3K2Close Tolerance Screw
- 5306-01-043-5723 MPN VEP220121-6F62Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-132-1049 MPN VEP220121-7V36Shear Bolt
- 5306-01-143-0587 MPN VAL23607-4-3Shoulder Bolt
- 5306-01-148-3680 MPN VCG0009-4-14Shear Bolt
- 5306-01-205-3406 MPN ST3M607-9-65Shoulder Bolt
- 5306-01-209-9303 MPN VAL23033-7-17XShoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-025-4825 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17020-10-30A | Huck International, Inc. |
PBF107810-30 | Sps Technologies, Llc |
VEPS132121-10F30 | Valley-todeco, Inc. |
VS3071-10F30 | Alcoa Global Fasteners, Inc. |
EWSB22D10-A30 | Sps Technologies, Llc |
EWSB22D10-A30 | Sps Technologies, Llc |
GB511B10-30 | Northrop Grumman Systems Corporation |
BM17020-10-30A | Huck Intl Inc |
BM17020-10-30A | Huck International, Inc. |
VEPS132121-10F30 | Valley-todeco, Inc. |
PBF107810-30 | Sps Technologies, Llc |
EWSB22D10-A30 | Sps Technologies, Llc |
VS3071-10F30 | Alcoa Global Fasteners, Inc. |
GB511B10-30 | Northrop Grumman Systems Corporation |
BM17020-10-30A | Huck Intl Inc |
EWSB22D10-A30 | Sps Technologies, Llc |