NSN 5306-01-025-9968
Wheel Bolt
Between 1.178 inches and 1.198 inches fastener length, hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number MS9494-10 for national stock number 5306010259968.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-025-9968.
-
MPN or Model
MS9494-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.053 inches and 1.093 inches -
Fastener Length
Between 1.178 inches and 1.198 inches -
Head Style
Hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.105 inches and 0.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-081-8672 MPN RW69V241Inductive Wire Wound Fixed Resistor
- 5930-00-121-2269 MPN 67A81-B155-1Pressure Switch
- 4920-00-169-2849 MPN 4902464Electrical Test Set
- 5905-00-247-2541 MPN 247ASC0304-012Film Fixed Resistor
- 4920-00-456-6521 MPN 67A47F30Interconnecti Panel
- 5950-00-781-5398 MPN 247ASC2088-001Transformer Set
- 5935-01-010-1837 MPN 386AS816Electrical Plug Connector
- 4820-01-070-1757 MPN 636AS188-2Check Valve
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-025-9968 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |
MS9494-10 | Military Standards |
787AS100-2 | Naval Air Systems Command |