NSN 5306-01-026-0381
Coaxial Connector
1.300 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 20-057-4-14D for national stock number 5306010260381.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-026-0381.
-
MPN or Model
20-057-4-14D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.300 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.122 inches first hole -
Material
Steel -
Material Specification
Mil-b-7838 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-034-3721 MPN 205-030-828-5Backup Plate Assemb
- 1560-00-158-9195 MPN 205-030-601-137Cabin Roof Panel Assembly
- 1680-00-183-5994 MPN 205-706-030-5Rescue Hoist Assy
- 1560-00-224-3686 MPN 204-031-172-55Fuselage Section
- 1560-00-310-3728 MPN 212-062-601-1Aircraft Fuel Tank Baffle
- 5985-00-471-8971 MPN 206-075-551-003Antenna
- 1680-00-675-1213 MPN 204-070-741-001Aircraft Se Cushion
- 1560-00-839-6794 MPN 204-061-246-1Air Frame Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-026-0381 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |
20-057-4-14D | Bell Helicopter Textron Inc. |