NSN 5306-01-026-4322
Wheel Bolt
0.500 inches fastener length, double hexagon w/hole head style, 0.250 inches head height, width between flats: between 0.212 inches and 0.220 inches .
Manufacturer part number R1057P6 for national stock number 5306010264322.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-026-4322.
-
MPN or Model
R1057P6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
0.500 inches -
Head Style
Double hexagon w/hole -
Head Height
0.250 inches -
Width Between Flats
Between 0.212 inches and 0.220 inches -
Extended Washer Diameter
0.312 inches -
Extended Washer Thickness
Between 0.030 inches and 0.040 inches -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
123000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 33.0 rockwell c -
Material
Iron alloy 660 -
Material Specification
Ams5735 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 1680-00-010-7481 MPN 4000T07P01Rear Ball Retainer
- 4920-01-241-7455 MPN 21C7730G01Rotor Flush Fixture
- 4820-01-020-7977 MPN 4027T69P06Pressurizing Oil Tank Valve
- 5935-01-056-4688 MPN 4043T11P01Electrical Receptacle Connector
- 5305-01-013-9583 MPN 2008T35P01Setscrew
- 5306-00-003-9648 MPN R105P5NMachine Bolt
- 5306-00-809-2447 MPN 324B268P1Close Tolerance Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-026-4322 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R1057P6 | General Electric Company |