NSN 5306-01-027-9512
Close Tolerance Hex Head Bolt
Between 1.222 inches and 1.252 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number VEH160271-4M13 for national stock number 5306010279512.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-027-9512.
-
MPN or Model
VEH160271-4M13
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.222 inches and 1.252 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
63.0 microinches grip -
Material
Titanium alloy -
Material Specification
Nas621 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
26512-gb511by4 manufacturers standard
More from these suppliers
- 5305-00-508-5088 MPN LS15267V3-36Machine Screw
- 5305-01-406-3075 MPN 3M925C3-11AClose Tolerance Screw
- 5305-01-496-1417 MPN TX1024C4D34-6AClose Tolerance Screw
- 5306-00-680-9388 MPN 61B211-1Machine Bolt
- 5306-00-905-8449 MPN MS21250-05024Shear Bolt
- 5306-01-037-3414 MPN 9134M82-P02Shoulder Bolt
- 5306-01-090-9610 MPN STSBG001A07D025Close Tolerance Bolt
- 5306-01-142-1489 MPN VAL23608-4-1Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-027-9512 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VEH160271-4M13 | Valley-todeco, Inc. |
110185-4-13M | Sps Technologies, Llc |
VS3117-4-13 | Alcoa Global Fasteners, Inc. |
BM15016-4-13A | Huck International, Inc. |
GB511BY4-13M | Sps Technologies, Llc |
GB511BY4-13M | Northrop Grumman Systems Corporation |
BM15016-4-13A | Huck Intl Inc |
110185-4-13M | Sps Technologies, Llc |