NSN 5306-01-029-8903
Close Tolerance Hex Head Bolt
Between 0.955 inches and 0.985 inches fastener length, undercut hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30NE3-10 for national stock number 5306010298903.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-029-8903.
-
MPN or Model
BACB30NE3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.955 inches and 0.985 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30ne manufacturers standard
More from these suppliers
- 5305-01-054-2530 MPN BACB30LU4-9Close Tolerance Screw
- 5305-01-216-7380 MPN 3M1034V4-11-24Close Tolerance Screw
- 5305-01-435-3897 MPN BACB30LU7-45Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-462-2725 MPN 3M1169V3-9AClose Tolerance Screw
- 5306-01-142-1486 MPN VAL23608-3-34Shoulder Bolt
- 5306-01-339-0207 MPN BACB30US6-14Shear Bolt
- 5306-01-350-2900 MPN VCD0020-12D-26AShear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-029-8903 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE3-10 | Valley-todeco, Inc. |
BACB30NE3-10 | Sps Technologies, Llc |
BACB30NE3-10 | Federal Manufacturing Corporation |
BACB30NE3-10 | Huck International, Inc. |
BACB30NE3-10 | Arconic Global Fasteners & Rings, |
BACB30NE3-10 | Sps Technologies, Llc |
BACB30NE3-10 | Sps Technologies, Llc |
BACB30NE3-10 | The Boeing Company |
BACB30NE3-10 | Arconic Global Fasteners & Rings, |