NSN 5306-01-031-0212
Coaxial Connector
Between 2.375 inches and 2.405 inches fastener length, dished hexagon head style, between 0.186 inches and 0.201 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number NAS1306-29DHW for national stock number 5306010310212.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-031-0212.
-
MPN or Model
NAS1306-29DHW
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 2.375 inches and 2.405 inches -
Head Style
Dished hexagon -
Head Height
Between 0.186 inches and 0.201 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Hole Diameter
0.106 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.275 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.168 inches first hole and 2.218 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1606 professional/industrial association standard
More from these suppliers
- 5940-01-425-6521 MPN NAS1063A15-406Terminal Board Marker Strip
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-6186 MPN NAS1100C08-22Machine Screw
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-052-8242 MPN MS24617-56Tapping Screw
- 5305-00-057-0505 MPN MS51958-8Machine Screw
- 5305-00-059-4579 MPN NAS1133-6Close Tolerance Screw
- 5305-00-067-5156 MPN MS21295-30Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-031-0212 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1306-29DHW | National Aerospace Standards |