NSN 5306-01-031-0757
Coaxial Connector
Between 4.580 inches and 4.627 inches fastener length, double hexagon head style, 0.328 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number 76639-9-66 for national stock number 5306010310757.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-031-0757.
-
MPN or Model
76639-9-66
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.512 inches -
Fastener Length
Between 4.580 inches and 4.627 inches -
Head Style
Double hexagon -
Head Height
0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 4.115 inches and 4.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-350-2705 MPN 60523-26Socket Head Cap Screw
- 5305-00-395-3416 MPN HT4024L5-13-1Close Tolerance Screw
- 5305-00-395-3437 MPN HT4024L5-14Close Tolerance Screw
- 5305-00-580-7224 MPN NAS1123-5HClose Tolerance Screw
- 5305-00-660-3028 MPN 53193-06-6Machine Screw
- 5305-00-877-9304 MPN NAS1202-18Close Tolerance Screw
- 5305-00-943-2168 MPN NAS1190C3P5LSocket Head Cap Screw
- 5305-01-005-4017 MPN NAS1191E02P6LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-031-0757 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
76639-9-66 | Sps Technologies, Llc |