NSN 5306-01-033-2644
Wheel Bolt
One 0.062 in. Dia hole through head.
Manufacturer part number FF-S-85 for national stock number 5306010332644.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-033-2644.
-
MPN or Model
FF-S-85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.366 inches -
Fastener Length
Between 0.469 inches and 0.500 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification all treatment responses -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
2 type and 10p style and 5 grade
More from these suppliers
- 5940-00-990-1658 MPN NAS705C2Stud Terminal
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 1680-01-668-8056 MPN NAS354-5-170Aircraft Control Tube Assembly
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-001-1948 MPN MS51850-24Tapping Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-033-2644 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-85 | Federal Specifications |
MS51096-355L | National Aerospace Standards |
MS51096-355L | Military Standards |
5306010332644 | E.c.a Etablissement |