NSN 5306-01-033-2663
Close Tolerance Hex Head Bolt
Between 0.938 inches and 0.968 inches fastener length, undercut hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30NE6H6 for national stock number 5306010332663.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-033-2663.
-
MPN or Model
BACB30NE6H6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 0.938 inches and 0.968 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Hole Diameter
0.075 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ne manufacturers standard
More from these suppliers
- 5305-01-435-5747 MPN BACB30LU8-25Close Tolerance Screw
- 5305-01-439-4807 MPN 3M1170C3-3AFClose Tolerance Screw
- 5306-01-042-2354 MPN VAL22034-5GS10Shear Bolt
- 5306-01-044-6541 MPN VAL23607-3-17Shoulder Bolt
- 5306-01-117-9739 MPN VCD0004-6-14Shear Bolt
- 5306-01-188-9625 MPN BACB30NE3D15Shear Bolt
- 5306-01-331-7577 MPN VAL23602-6D012Close Tolerance Bolt
- 5306-01-465-8474 MPN HS5798-9-24Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-033-2663 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE6H6 | The Boeing Company |
BACB30NE6H6 | Sps Technologies, Llc |
BACB30NE6H6 | Valley-todeco, Inc. |
BACB30NE6H6 | Arconic Global Fasteners & Rings, |
BACB30NE6H6 | Federal Manufacturing Corporation |
BACB30NE6H6 | Huck International, Inc. |
BACB30NE6H6 | Arconic Global Fasteners & Rings, |
BACB30NE6H6 | Sps Technologies, Llc |
BACB30NE6H6 | Sps Technologies, Llc |
BACB30NE6H6 | Sps Technologies, Llc |