NSN 5306-01-035-4296
Wheel Bolt
Between 0.449 inches and 0.479 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 29-49541-1 for national stock number 5306010354296.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-035-4296.
-
MPN or Model
29-49541-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.260 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Thread Diameter
0.625 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-2458 MPN 107S8326-299Housing
- 4920-00-181-8172 MPN F65682Cargo Hoist Aligner
- 1560-00-210-9013 MPN 6-39613-5Hinge Latch Handle Assembly
- 5905-00-228-0095 MPN 25-44193-32Inductive Wire Wound Fixed Resistor
- 1560-00-480-9364 MPN 35-8667-5Gate Support Channel
- 1560-00-533-9143 MPN 6-63220Aircraft Structural Component Support
- 1560-00-534-3895 MPN 66-2433Flap Drive Tee Cover
- 1560-00-601-2522 MPN 60-4801Dome Light Box
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-035-4296 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
29-49541-1 | Titan Distribution Inc |
29-49541-1 | The Boeing Company |
29-49541-1 | Dico Inc |