NSN 5306-01-036-7746
Coaxial Connector
Head slotted one on each side,indented 0.130 in. And 0.120 in.Wide,slots are provided to accomadate an external driver.
Manufacturer part number 7531261-01 for national stock number 5306010367746.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-036-7746.
-
MPN or Model
7531261-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.930 inches -
Head Diameter
0.813 inches -
Head Height
Between 0.145 inches and 0.150 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
0.505 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Chamfer Angle
45.0 degrees -
Material
Steel comp 4130 -
Surface Treatment
Cadmium -
Surface Treatment Specification
870, cl 2, type 2 military standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-004-4578 MPN 160D217004-31Fuselage Void Filler
- 1560-01-112-6782 MPN 160D217008-241Void Filler
- 5935-01-483-4679 MPN 9452042-10Electrical Connector Assembly
- 1560-01-559-1758 MPN 160D217024-2Explosion Suppressant Foam Segment
- 1560-01-559-2517 MPN 160D217011-1Explosion Suppressant Foam Segment
- 1560-01-054-4826 MPN 162D622215-1002Lever Assembly
- 1560-01-100-4284 MPN 160D217005-113Void Filler
- 1560-01-591-5123 MPN 162D612421-1002Aircraft Stiffener Rib
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-036-7746 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7531261-01 | Ogden Air Logistics Center |