NSN 5306-01-036-9127
Coaxial Connector
2.790 inches fastener length, crowned hexagon head style, 0.640 inches head height, width between flats: between 1.977 inches and 1.990 inches .
Manufacturer part number 69-59903-7 for national stock number 5306010369127.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-036-9127.
-
MPN or Model
69-59903-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.280 inches and 1.448 inches -
Fastener Length
2.790 inches -
Head Style
Crowned hexagon -
Head Height
0.640 inches -
Width Between Flats
Between 1.977 inches and 1.990 inches -
Grip Diameter
Between 1.3725 inches and 1.3740 inches -
Thread Diameter
1.375 inches -
Grip Length
1.342 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
A-6487 assn standard single material response -
Surface Treatment
Cadmium grip -
Thread Series Designator
Unjf
More from these suppliers
- 5945-00-009-1239 MPN BACR13CG3AElectromagnetic Relay
- 4920-00-061-7800 MPN F4-10160-1Modification Kit
- 1560-00-065-5526 MPN 114E4070-9Heat And Vent Duct
- 1680-00-070-6313 MPN 65-32872-3Rearview Mirror Assembly
- 1560-00-092-2898 MPN 6-47839-2Wing Flap Drive Base
- 5930-00-118-7348 MPN 25-61656-1Electrical Switch
- 1560-00-342-8302 MPN 90-2907Aircraft Access Cover
- 1560-00-386-2627 MPN 63-1322Aircraft Structural Plate
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-036-9127 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
69-59903-7 | The Boeing Company |
69-78670-3 | The Boeing Company |