NSN 5306-01-037-3409
Wheel Bolt
Self locking patch.
Manufacturer part number 9130M45P02 for national stock number 5306010373409.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-037-3409.
-
MPN or Model
9130M45P02
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.000 inches and 1.188 inches -
Fastener Length
Between 1.438 inches and 1.500 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Locking Feature
Strip threads -
Thread Diameter
0.375 inches -
Grip Length
0.500 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
9300 pounds per square inch -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-114-2230 MPN 1C5878G02Aircraft Turbine Engine Components Case
- 4920-00-139-7908 MPN 1C6281G01Inspection Fixture
- 4920-00-193-9818 MPN 1C5885P10Turbine Container
- 4920-00-221-1837 MPN 1C2873-191G1Tester Hose Assy
- 4920-00-947-4079 MPN 21C1442P010Locking Clip Puller
- 4920-01-003-4670 MPN 518D768P268Stiffner
- 4920-01-113-3099 MPN 1C4798P03Exhaust Duct Insertion Guide
- 5905-01-114-6505 MPN J165P2100AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-037-3409 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9130M45P02 | General Electric Company |
203-4678525 ITE | Naval Ship Systems Command |
9130M45P02 | Long-lok Fasteners Corporation |
PT90725-64 | Long-lok Fasteners Corporation |